Water resistance is minimized after initial lift, allowing the full potential of the catamaran to produce even greater acceleration. Packed with KYOSHO’s design know-how. |
Equipped with Team ORION 41x68mm large watercooled brushless motor. Delivers efficient cooling to the motor while producing incredible torque and power. |
Pre-installed with Team ORION 2-6 cell compatible waterproof ESC, which is watercooled and delivers a maximum current of 120A. Able to handle high loads to support high-speed performance. |
Precision angle of the stern tube delivers even more efficiency from the wire drive to create the optimal driveline angle. |
Bracket units are also made from high precision machine cut CNC aluminum. Allows easy adjustment of hull posture with changes in wind and water conditions. |
BLS motor ESC and water cooling system efficient. |
High strength and precision FRP hull incorporates a separate waterproof radio room. A magnetic hatch and radio hatch that requires no tools to access are standard features. |
Two 3-cell Li-Po batteries (sold separately) are loaded into each sponson, close to the center of gravity. This configuration results in a low centre of gravity and optimal balance for superior stability at high-speed. |
Pre-installed 2.4GHz Perfex KT-201 3-ch R/C system requires no frequency band selection. Transmitter features a high visibility LCD screen. |
- Factory assembled precision-built FRP hull is complete with coloring.
- Pre-installed Team ORION 41x68mm large watercooled brushless motor.
- Pre-installed Team ORION 120A watercooled, waterproof ESC.
- Machine cut CNC aluminum drive brackets enable adjustment of running posture.
- Machine cut CNC aluminum flip-up water intake rudder.
- Equipped with high-torque rudder servo.
- Includes drip-proof rubber boots, aluminum servo mount, carbon nylon 3-blade screw (with spare).
|
< ReadySet Contents >
|
< Nécessaire de mise en route >
|
Données techniques
|
Longueur | 945mm |
Largeur | 230mm |
Poids | 2,350g approx. |
Moteur | Team ORION 41x68mm refroidissement liquide |
Batteries | 7.4-11.1V-3600-4000mAh Li-Po (Super Plug, 2-cell x 2 packs - 3-cell x 2 packs / one pack for each side) |
Radio | Perfex KT-201 |
Helice | D40xP1.4 (3-blade) |
Variateur | Team ORION Vortex Marine WP Brushless ESC (120A/2-6S) |
Water resistance is minimized after initial lift, allowing the full potential of the catamaran to produce even greater acceleration. Packed with KYOSHO’s design know-how. |
Equipped with Team ORION 41x68mm large watercooled brushless motor. Delivers efficient cooling to the motor while producing incredible torque and power. |
Pre-installed with Team ORION 2-6 cell compatible waterproof ESC, which is watercooled and delivers a maximum current of 120A. Able to handle high loads to support high-speed performance. |
Precision angle of the stern tube delivers even more efficiency from the wire drive to create the optimal driveline angle. |
Bracket units are also made from high precision machine cut CNC aluminum. Allows easy adjustment of hull posture with changes in wind and water conditions. |
BLS motor ESC and water cooling system efficient. |
High strength and precision FRP hull incorporates a separate waterproof radio room. A magnetic hatch and radio hatch that requires no tools to access are standard features. |
Two 3-cell Li-Po batteries (sold separately) are loaded into each sponson, close to the center of gravity. This configuration results in a low centre of gravity and optimal balance for superior stability at high-speed. |
Pre-installed 2.4GHz Perfex KT-201 3-ch R/C system requires no frequency band selection. Transmitter features a high visibility LCD screen. |
- Factory assembled precision-built FRP hull is complete with coloring.
- Pre-installed Team ORION 41x68mm large watercooled brushless motor.
- Pre-installed Team ORION 120A watercooled, waterproof ESC.
- Machine cut CNC aluminum drive brackets enable adjustment of running posture.
- Machine cut CNC aluminum flip-up water intake rudder.
- Equipped with high-torque rudder servo.
- Includes drip-proof rubber boots, aluminum servo mount, carbon nylon 3-blade screw (with spare).
|
< ReadySet Contents >
|
< Nécessaire de mise en route >
|
Données techniques
|
Longueur | 945mm |
Largeur | 230mm |
Poids | 2,350g approx. |
Moteur | Team ORION 41x68mm refroidissement liquide |
Batteries | 7.4-11.1V-3600-4000mAh Li-Po (Super Plug, 2-cell x 2 packs - 3-cell x 2 packs / one pack for each side) |
Radio | Perfex KT-201 |
Helice | D40xP1.4 (3-blade) |
Variateur | Team ORION Vortex Marine WP Brushless ESC (120A/2-6S) |